Amid all the discussions about plant nutrients, grow room environment management and propagation techniques, one essential aspect of hydroponic growing can get lost. But ...
Bubble Gen V1 - Aerate Your Water Tank with a Water Pump
The BubbleGen is a twin jet hydroponic bubble generator with integral silencer which efficiently and quietly oxygenates and circulates a nutrient tank.
BubbleGen uses atmospheric pressure to pull oxygen rich air through the input port and mixes it with the nutrients passing through the body of the unit, ejecting an energetic circulating stream of nutrients and bubbles without the need for a noisy compressor air pump.
The BubbleGen completely replaces the need for a circulation pump, air pump and air stones. If you are currently using a nutrient chiller a single pump can be used to drive the BubbleGen.
• Oxygenates the nutrient tank quietly and efficiently.
• Removes the need for noisy air pumps.
• Removes the need for air stones that can clog and promote bacteria and algae.
• Removes the need for additional tank circulation jets or pumps.
• Quiet operation – only uses the water pump to drive the system.
• Works on vacuum rather than positive pressure so do not add additional heat to the solution.
• Air can be pulled from whenever required with an additional hose(1.5m air hose supplied).
• Saves cost and energy compared with air pumps, circulation pumps and air stones.
• Can operate with less than 1000LPH to over 4000LPH pumps.
• Supplied with three suction cups to secure mount to the bottom of the tank.
• Simple installation with only two connecting tubes.
- Be the first to review this product
Write Your Own Review
There are no product questions yet.