01296 707020 Lines open Mon-Fri 10am-5.30pm / Sat 10am-3pm / Sun 10am-2pm

Product was successfully added to your shopping cart.
G.A.S. Enviro Controller - EC or AC - Complete Grow Room Control

The new Enviro Controller from Global Air Supplies is the ideal grow room controller. Suitable for use with Digital (EC) or Analogue (AC) fans. This controller will happily run 1 x EC intake fan, 1 x EC outtake fan, 1 x AC intake fan and 1 x AC outtake fan. In which ever combination best suits your needs. Packed full of features, the G.A.S Enviro Controller enable complete and precise control over your grow room equipment offering the best balance of environment.


Availability: In stock

£319.99

G.A.S. Enviro Controller - EC or AC - Complete Grow Room Control

The new Enviro Controller from Global Air Supplies is the ideal grow room controller. Suitable for use with Digital (EC) or Analogue (AC) fans.

The Enviro Controller also has sockets for 2 of the following:

• Humidifiers

• Dehumidifiers

• Heaters

• Lighting timer (up to 1,200W per exit cable)

• Irrigation Timer or CO2 Timer.

This controller will happily run 1 x EC intake fan, 1 x EC outtake fan, 1 x AC intake fan and 1 x AC outtake fan. In which ever combination best suits your needs.

EC Connections - Suitable for use with any SystemAir, G.A.S. or Phresh Hyper Fan.

AC Connections - Suitable for use with any analogue fans: RVK, CAN, Rhino, Vent, WK and more. Capable of supporting 2200W in a single port or 3000W combined between the 2.

The 2 lower sockets are suitable for connecting:

• Humidifiers

• Dehumidifiers

• Heaters

• Lighting timer (up to 1,200W per socket) If using grow lights, don't go higher than 2 x 600w lights (1,200W combined) due to the initial, power surge.

• Irrigation Timer or CO2 Timer.

Packed full of features, the G.A.S Enviro Controller enable complete and precise control over your grow room equipment offering the best balance of environment.

Use a heater, humidifier or dehumidifier to control environmental factors.

A built in fan speed balancer ensures intake and outtake fans run independently, this controls negative pressure. If using 2 intake fans and 2 outtake fans, both intake will run at the same speed and both outtake will run at the same speed.

Water tight, the G.A.S. Enviro Controller is IP44 rated.

Separate Lights On and Lights Off modes allow for independent Temperature and Humidity settings.

In addition to your fans, the G.A.S. Enviro controller will run 4 x 600w lights. Simply split 2 lights into each of the lower sockets.

An additional features is available for closed loop systems. Fan speeds cycle up and down to remove excess humidity and temperature whilst leaving CO2 in your grow space.

G.A.S. Enviro Controller Technical Specifications:

Operating Voltage 230V / 50Hz

Max Amp 13A

Intake Fan Max 13A 2,200W

Outtake Fan Max 13A 2,200W

Exit 1 Max 2,200W - Unless lighting, then 1200W

Exit 2 Max 2,200W - Unless lighting, then 1200W

Power Cable 1.2M

Temperature Probe 3.8M

Controller maximum wattage is 3000w combined.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value

There are no product questions yet.

Ask Your Question

Related Products

FROM THE BLOG